christoffer Johansson

Templates in Simcenter STAR-CCM+ by Volupe

In this week’s Volupe blog post we are happy to announce the Templates page at the Volupe webpage. The template page is the newest addition to our CFD handbook. The CFD handbook is available to everyone, and hopefully it helps...

17 November 2023

Simcenter STAR-CCM+

Conformal meshing in Simcenter STAR-CCM+

In this week’s blog post we are going to have a closer look at conformal meshing. Conformal meshing is when the cell faces on a surface exactly align with the cell faces on the surface other side of a boundary/interface...

3 November 2023

Simcenter STAR-CCM+

Monitors in Simcenter STAR-CCM+

In this week’s blog post we are looking at monitors within Simcenter STAR-CCM+. A monitor is a collector of information that can be used for visualizing information or results from your simulation. For example, the monitor can be used as...

15 September 2023

Surface repair – useful and new features

Simcenter STAR-CCM+

Surface repair – useful and new features

We at Volupe are excited to be back with new blog posts after the summer break where we did re-postings of our most appreciated blogs. The first blog post for this season will bring up the topic Surface repair. Surface...

29 August 2023

Simcenter STAR-CCM+

How to create a parabolic profile for inlets in Simcenter STAR-CCM+

In this week’s blog post we are going to look at how to create a parabolic function, which for example can be useful when you want to define a fully developed velocity profile at your inlets. Velocity profiles Due to...

22 June 2023

Simcenter STAR-CCM+

Electromagnetism in Simcenter STAR-CCM+ with symmetric boundaries for magnetic simulations

Simcenter STAR-CCM+ is a multiphysics tool capable of simulating a wide range of different physical aspects. One of these areas of simulation is electromagnetism (EMAG), which we are going to look closer at in this week’s blog post at the...

17 May 2023

Simcenter STAR-CCM+

Residuals in Simcenter STAR-CCM+

Every time we start solving for a solution in a simulation we will automatically generate a plot of the residuals that will show in the GUI. This is set up as default since residuals give important information about how well...

21 April 2023

Simcenter STAR-CCM+

Surface and volume extruders in Simcenter STAR-CCM+

In this week’s blog post we will take a closer look at surface and volume extruders. This feature is very powerful for extending inlets and outlets. Extending open boundaries is a recommendation since we don’t want them to affect the...

10 March 2023

Simcenter FLOEFD

Parametric studies in Simcenter FLOEFD

In projects where simulations are performed there is often a need to investigate changes in results due to changes in the product, like design exploration. These changes can be geometrical, investigation of performance at different flow conditions, and/or aspects of...

10 February 2023

Simcenter STAR-CCM+

Reduce scrolling and clicking using custom trees in Simcenter STAR-CCM+

Due to the extensive multiphysics capabilities in Simcenter STAR-CCM+, setting up simulations may sometimes involve a lot of scrolling and clicking in the simulation tree. This week’s Volupe blog post will show how you can simplify your workflow and reduce...

23 January 2023

1 2 … 5 6

Author: christoffer Johansson

Templates in Simcenter STAR-CCM+ by Volupe

Conformal meshing in Simcenter STAR-CCM+

Monitors in Simcenter STAR-CCM+

Surface repair – useful and new features

How to create a parabolic profile for inlets in Simcenter STAR-CCM+

Electromagnetism in Simcenter STAR-CCM+ with symmetric boundaries for magnetic simulations

Residuals in Simcenter STAR-CCM+

Surface and volume extruders in Simcenter STAR-CCM+

Parametric studies in Simcenter FLOEFD

Reduce scrolling and clicking using custom trees in Simcenter STAR-CCM+

MPI surface wrapper

Exploring Simcenter STAR-CCM+’s Time Scale and Stages Functionality for Enhanced Automation

Adaptive Mesh Refinement for Virtual Disk Methods