Simcenter STAR-CCM+ – Page 14

Simcenter STAR-CCM+ version 2021.1 news

In this blog post we will look at the highlights of the news for Simcenter STAR-CCM+ version 2021.1, that was released in February. In an earlier post from a few weeks back the new functionality of surrogate models in Design...

6 May 2021

Simcenter STAR-CCM+

Parametric Modelling with Simcenter STAR-CCM+

Parametric Modelling with Simcenter STAR-CCM+ Simulation helps us to drive engineering innovation. And the, by far, most important tool for that is design space exploration. However, modelling real-world behavior of complex systems with an increased number of input factors opens...

6 May 2021

Simcenter STAR-CCM+

Simcenter STAR-CCM+ version 2020.3 news – part 4

This week, we will look at news related to Multiphase modelling for Simcenter STAR-CCM+ version 2020.3. We will look at news related to both the Eulerian and the Langrangian framework. And news relating to both fields in combination. There are...

6 May 2021

Simcenter STAR-CCM+

S2S radiation in Simcenter STAR-CCM+

This week, we will look at radiation, focusing on S2S (surface to surface) radiation in Simcenter STAR-CCM+. We will look at some things to consider when including radiation, how to use it efficiently and how to understand it. We will...

6 May 2021

Simcenter STAR-CCM+

Simcenter STAR-CCM+ version 2020.3 news – Part 2

Now, the newest release of Simcenter STARCCM+ (version 2020.3) has been around for a couple of weeks. In this week’s blog post, we will continue the overview of the news related to the new release. We will start with some...

6 May 2021

From CAD to complete simulation setup within 5 minutes

Simcenter STAR-CCM+

From CAD to complete simulation setup within 5 minutes

From CAD to complete simulation Let´s be honest, hull performance simulations are quite complicated. We two have immiscible fluids, a body that is in motion as subject to those fluids and flow phenomena of high complexity, such as vortices and...

6 May 2021

Environment Boundary and Multi-Layer resistance model

Simcenter STAR-CCM+

Environment Boundary and Multi-Layer resistance model

This week’s blog post will be about heat transfer, in general the environment boundary condition in Simcenter STAR-CCM+ and its benefits. There will also be a small deep dive into multi-layer resistance and the limitations of thermal resistance on an...

30 April 2021

Simcenter STAR-CCM+

How to reset you Simcenter Star-CCM+ GUI

Sometimes it might happen that you GUI for Simcenter Star-CCM+ changes. This could happen by accident or you might have changed it consciously. The changes to it might still be in place the next time you start it. In this...

28 April 2021

Simcenter STAR-CCM+

Directed meshing in Simcenter STAR-CCM+

This week we will look at the directed mesher in Simcenter STAR-CCM+. We will see how to use the directed mesher in a case where we have a narrow passage in a rotational geometry. In a situation like that, your...

28 April 2021

Simcenter STAR-CCM+

Advanced Rendering in Simcenter Star-CCM+

Advanced rendering in Simcenter Star-CCM+ In this post I will go through some advanced post-processing. The aim is to present some methods to add photo-realism to your pictures, making them more realistic and pleasant to look at. Also, hopefully you...

28 April 2021

1 2 … 13 14 15 16

Category: Simcenter STAR-CCM+

Simcenter STAR-CCM+ version 2021.1 news

Parametric Modelling with Simcenter STAR-CCM+

Simcenter STAR-CCM+ version 2020.3 news – part 4

S2S radiation in Simcenter STAR-CCM+

Simcenter STAR-CCM+ version 2020.3 news – Part 2

From CAD to complete simulation setup within 5 minutes

Environment Boundary and Multi-Layer resistance model

How to reset you Simcenter Star-CCM+ GUI

Directed meshing in Simcenter STAR-CCM+

Advanced Rendering in Simcenter Star-CCM+

MPI surface wrapper

Exploring Simcenter STAR-CCM+’s Time Scale and Stages Functionality for Enhanced Automation

Adaptive Mesh Refinement for Virtual Disk Methods