Simcenter STAR-CCM+ – Page 4

Take Control of Part Curves in Simcenter STAR-CCM+

Creating the right mesh for your numerical analysis is one of the trickiest tasks! In Simcenter STAR-CCM+ we have Custom Controls allowing us to create beautiful meshes with refinements wherever we expect stronger gradients to be solved. One of these...

24 March 2023

Simcenter STAR-CCM+

Surface and volume extruders in Simcenter STAR-CCM+

In this week’s blog post we will take a closer look at surface and volume extruders. This feature is very powerful for extending inlets and outlets. Extending open boundaries is a recommendation since we don’t want them to affect the...

10 March 2023

Simcenter STAR-CCM+

Simcenter STAR-CCM+ 2302 multiphase news

It has become bit of a tradition for me personally to make a blog post on the news related to multiphase flow, each time a new version of Simcenter STAR-CCM+ is released. And this holds true this time as well....

6 March 2023

Simcenter STAR-CCM+

Splitting faces in Simcenter STAR-CCM+ 3D-CAD module

In this week’s blog post we will demonstrate the different options you have to split faces inside the 3D-CAD module in STAR-CCM+. The need for splitting faces could be for e.g. post-processing purposes or perhaps for splitting boundary conditions on...

20 February 2023

One-way FSI for a rotating propeller using file exchange

Simcenter STAR-CCM+

One-way FSI for a rotating propeller using file exchange

One of our goals as design engineers is to get close as we can to reality when doing simulations of a prototype. By simulating fluid dynamics you can get a good prediction of how a prototype performs. To take this...

3 February 2023

Simcenter STAR-CCM+

Gap closure in the surface wrapper

In this week´s Volupe blog post it is time to look at the gap closure tool in the surface wrapper in Simcenter STAR-CCM+. The surface wrapper is a tool that will help you create a calculation domain regardless of if...

27 January 2023

Simcenter STAR-CCM+

Reduce scrolling and clicking using custom trees in Simcenter STAR-CCM+

Due to the extensive multiphysics capabilities in Simcenter STAR-CCM+, setting up simulations may sometimes involve a lot of scrolling and clicking in the simulation tree. This week’s Volupe blog post will show how you can simplify your workflow and reduce...

23 January 2023

Overset mesh with AMR, some interesting notes

Simcenter STAR-CCM+

Overset mesh with AMR, some interesting notes

In this week’s Volupe blog post we will take look at the combination of overset mesh and adaptive mesh refinement (AMR). My colleague Christoffer wrote a blog post about overset mesh a while back and how it works with refinements...

13 January 2023

Simcenter STAR-CCM+

Thin mesher in Simcenter STAR-CCM+ (part 2)

In this week’s blog post we will look at the remaining expert features from the blog post – Thin mesher in Simcenter STAR-CCM+ part 1. In the previous blog post we used an exhaust gas manifold geometry to visualize the...

5 January 2023

Simcenter STAR-CCM+

Simulation in Simcenter STAR-CCM+ with parameters connected to your CAD software (part 2)

In this week’s blog post we will look at the connection between Simcenter STAR-CCM+ and your CAD software. We have a thorough description of the CAD Client in a previous blog post, https://volupe.se/en/simcenter-star-ccm-and-nx-cad-client/, but here you will find some new...

30 December 2022

1 2 3 4 5 … 15 16

Category: Simcenter STAR-CCM+

Take Control of Part Curves in Simcenter STAR-CCM+

Surface and volume extruders in Simcenter STAR-CCM+

Simcenter STAR-CCM+ 2302 multiphase news

Splitting faces in Simcenter STAR-CCM+ 3D-CAD module

One-way FSI for a rotating propeller using file exchange

Gap closure in the surface wrapper

Reduce scrolling and clicking using custom trees in Simcenter STAR-CCM+

Overset mesh with AMR, some interesting notes

Thin mesher in Simcenter STAR-CCM+ (part 2)

Simulation in Simcenter STAR-CCM+ with parameters connected to your CAD software (part 2)

MPI surface wrapper

Exploring Simcenter STAR-CCM+’s Time Scale and Stages Functionality for Enhanced Automation

Adaptive Mesh Refinement for Virtual Disk Methods